Synthesis and Characterization of Durable Antifog Silane-Pyrrolidone Thin Coatings onto Polymeric Films.

The fogging of transparent surfaces-condensation of water vapor in the air to a small liquid surface at specific environmental conditions-scatters incident light, creating a blurry vision. Fogging presents a significant challenge in various industries, adversely affecting numerous applications including plastic packaging, agricultural films, and various optical devices. Superhydrophobic or superhydrophilic coatings are the main strategies used to induce antifogging to minimize light scattering. Here, an innovative approach is introduced to mitigate fogging by modifying the surface properties of polymeric films, focusing on corona-treated polyethylene as a model. Coatings were prepared in two successive steps: the addition of radical co-polymerization of methacryloxypropyltriethoxysilane and N-vinylpyrrolidone followed by the step-growth Stöber polymerization of the formed silane monomer. The polymeric dispersion was spread on oxidized films via a Mayer rod and dried. Scanning and force microscopy, FIB, XPS, and UV-vis spectroscopy revealed a thin coating composed of cross-linked siloxane (Si-O-Si) covalently bonded to surface hydroxyls exposing pyrrolidone groups. Contact angle measurements, hot-fog examination, and durability tests indicated a durable antifogging activity.

Fabrication and Applications of Magnetic Polymer Composites for Soft Robotics.

The emergence of magnetic polymer composites has had a transformative impact on the field of soft robotics. This overview will examine the various methods by which innovative materials can be synthesized and utilized. The advancement of soft robotic systems has been significantly enhanced by the utilization of magnetic polymer composites, which amalgamate the pliability of polymers with the reactivity of magnetic materials. This study extensively examines the production methodologies involved in dispersing magnetic particles within polymer matrices and controlling their spatial distribution. The objective is to gain insights into the strategies required to attain the desired mechanical and magnetic properties. Additionally, this study delves into the potential applications of these composites in the field of soft robotics, encompassing various devices such as soft actuators, grippers, and wearable gadgets. The study emphasizes the transformative capabilities of magnetic polymer composites, which offer a novel framework for the advancement of biocompatible, versatile soft robotic systems that utilize magnetic actuation.

Engineering of PVA/PVP Hydrogels for Agricultural Applications.

Hydrogels have gained significant popularity in agricultural applications in terms of minimizing waste and mitigating the negative environmental impact of agrochemicals. This review specifically examines the utilization of environmentally friendly, shapable hydrogels composed of polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) in various casings for crop protection against different pests, fertilizing, and watering. To activate their effectiveness, PVA/PVP hydrogels were loaded with both hydrophilic and hydrophobic environmentally friendly pesticides, namely hydrogen peroxide (HP), the essential oil thymol, and urea as a fertilizer, either separately or in combination. This review covers various physical and chemical approaches used for loading, shaping, and controlling the release profiles of pesticides and fertilizers. Additionally, it explores the evaluation of the chemical composition, structure, classification, rheology, and morphology of the hydrogels as well as their impact on the thermal stability of the encapsulated pesticides and fertilizer, followed by biological tests. These hydrogels significantly contribute to the stabilization and controlled release of essential nutrients and biocides for plants, while maintaining excellent biocidal and fertilizing properties as well as sustainability characteristics. By shedding light on the latest insights into the concepts, applications, and results of these hydrogels, this review demonstrates their immense potential for widespread future use in agriculture.

Synthesis and Characterization of Durable Antibiofilm and Antiviral Silane-Phosphonium Thin Coatings for Medical and Agricultural Applications.

Pathogens such as bacteria and viruses cause disease in a range of hosts, from humans to plants. Bacterial biofilms, communities of bacteria, e.g., Staphylococcus aureusand Escherichia coli, attached to the surface, create a protective layer that enhances their survival in harsh environments and resistance to antibiotics and the host's immune system. Biofilms are commonly associated with food spoilage and chronic infections, posing challenges for treatment and prevention. Tomato brown rugose fruit virus (ToBRFV), a newly discovered tobamovirus, infects tomato plants, causing unique symptoms on the fruit, posing a risk for tomato production. The present study focuses on the effectiveness of silane-phosphonium thin coatings on polymeric films, e.g., polypropylene. Phosphonium has significant antibacterial activity and is less susceptible to antibacterial resistance, making it a safer alternative with a reduced environmental impact. We successfully synthesized silane-phosphonium monomers as confirmed by 31P NMR and mass spectrometry. The chemical composition, thickness, morphology, and wetting properties of the coatings were tested by Fourier-transform infrared spectroscopy with attenuated total reflectance, focused ion beam, atomic force microscopy, environmental scanning electron microscope, and contact angle (CA) measurements. The antibiofilm and antibacterial activities of the coatings were tested against S. aureus and E. coli, while the antiviral activity was evaluated against ToBRFV. The significant antibiofilm and antiviral activity suggests applications in various fields including medicine, agriculture, and the food industry.

Engineered Cross-Linked Silane with Urea Polymer Thin Durable Coatings onto Polymeric Films for Controlled Antiviral Release of Activated Chlorine and Essential Oils.

In March 2020, the World Health Organization announced a pandemic attributed to SARS-CoV-2, a novel beta-coronavirus, which spread widely from China. As a result, the need for antiviral surfaces has increased significantly. Here, the preparation and characterization of new antiviral coatings on polycarbonate (PC) for controlled release of activated chlorine (Cl+) and thymol separately and combined are described. Thin coatings were prepared by polymerization of 1-[3-(trimethoxysilyl)propyl] urea (TMSPU) in ethanol/water basic solution by modified Stöber polymerization, followed by spreading the formed dispersion onto surface-oxidized PC film using a Mayer rod with appropriate thickness. Activated Cl-releasing coating was prepared by chlorination of the PC/SiO2-urea film with NaOCl through the urea amide groups to form a Cl-amine derivatized coating. Thymol releasing coating was prepared by linking thymol to TMSPU or its polymer via hydrogen bonds between thymol hydroxyl and urea amide groups. The activity towards T4 bacteriophage and canine coronavirus (CCV) was measured. PC/SiO2-urea-thymol enhanced bacteriophage persistence, while PC/SiO2-urea-Cl reduced its amount by 84%. Temperature-dependent release is presented. Surprisingly, the combination of thymol and chlorine had an improved antiviral activity, reducing the amount of both viruses by four orders of magnitude, indicating synergistic activity. For CCV, coating with only thymol was inactive, while SiO2-urea-Cl reduced it below a detectable level.

In Situ Coatings of Polymeric Films with Core Polystyrene, Core-Shell Polystyrene/SiO2, and Hollow SiO2 Micro/Nanoparticles and Potential Applications.

In many industrial settings, films of polymers such as polypropylene (PP) and polyethylene terephthalate (PET) require surface treatment due to poor wettability and low surface energy. Here, a simple process is presented to prepare durable thin coatings composed of polystyrene (PS) core, PS/SiO2 core-shell, and hollow SiO2 micro/nanoparticles onto PP and PET films as a platform for various potential applications. Corona-treated films were coated with a monolayer of PS microparticles by in situ dispersion polymerization of styrene in ethanol/2-methoxy ethanol with polyvinylpyrrolidone as stabilizer. A similar process on untreated polymeric films did not yield a coating. PS/SiO2 core-shell coated microparticles were produced by in situ polymerization of Si(OEt)4 in ethanol/water onto a PS-coated film, creating a raspberry-like morphology with a hierarchical structure. Hollow porous SiO2-coated microparticles onto a PP/PET film were formed by in situ dissolution of the PS core of the coated PS/SiO2 particles with acetone. The coated films were characterized by E-SEM, FTIR/ATR, and AFM. These coatings may be used as a platform for various applications, e.g. magnetic coatings onto the core PS, superhydrophobic coatings onto the core-shell PS/SiO2, and solidification of oil liquids within the hollow porous SiO2 coating.

Proteinoid Polymers and Nanocapsules for Cancer Diagnostics, Therapy and Theranostics: In Vitro and In Vivo Studies.

Proteinoids-simple polymers composed of amino acids-were suggested decades ago by Fox and coworkers to form spontaneously by heat. These special polymers may self-assemble in micrometer structures called proteinoid microspheres, presented as the protocells of life on earth. Interest in proteinoids increased in recent years, in particular for nano-biomedicine. They were produced by stepwise polymerization of 3-4 amino acids. Proteinoids based on the RGD motif were prepared for targeting tumors. Nanocapsules form by heating proteinoids in an aqueous solution and slowly cooling to room temperature. Proteinoid polymers and nanocapsules suit many biomedical applications owing to their non-toxicity, biocompatibility and immune safety. Drugs and/or imaging reagents for cancer diagnostic, therapeutic and theranostic applications were encapsulated by dissolving them in aqueous proteinoid solutions. Here, recent in vitro and in vivo studies are reviewed.

Bioimaging Probes Based on Magneto-Fluorescent Nanoparticles.

Novel nanomaterials are of interest in biology, medicine, and imaging applications. Multimodal fluorescent-magnetic nanoparticles demand special attention because they have the potential to be employed as diagnostic and medication-delivery tools, which, in turn, might make it easier to diagnose and treat cancer, as well as a wide variety of other disorders. The most recent advancements in the development of magneto-fluorescent nanocomposites and their applications in the biomedical field are the primary focus of this review. We describe the most current developments in synthetic methodologies and methods for the fabrication of magneto-fluorescent nanocomposites. The primary applications of multimodal magneto-fluorescent nanoparticles in biomedicine, including biological imaging, cancer treatment, and drug administration, are covered in this article, and an overview of the future possibilities for these technologies is provided.

Fabrication and Characterization of Hydrogen Peroxide and Thymol-Loaded PVA/PVP Hydrogel Coatings as a Novel Anti-Mold Surface for Hay Protection.

Animal food source production is increasing due to the growing world population. Many sources (e.g., hay) are prone to mold development, resulting in food degradation. This study proposes an environmentally friendly anti-mold fungicide comprising hydrogen peroxide (HP) and thymol entrapped in a polyvinyl alcohol/pyrrolidone (PVA/PVP) hydrogel (PVA is biodegradable and PVP is water soluble and non-toxic) coated on a polyethylene (PE) films for preservative hay packaging. The hydrogels improved the thermal stability of the entrapped HP and thymol, resulting in a prolonged release into the hay and thereby increasing anti-mold activity. The hydrogel composition and morphology, thymol and HP thermal stability, and release rates through indirect (gas phase) contact were investigated. Fungicidal capabilities were tested, indicating wide-range efficiency against mold growth on hay with a clear advantage for the thymol-loaded hydrogels. No visual side effects were observed on hay exposed to the released fumes of HP and/or thymol. These results demonstrate the potential of thymol-loaded hydrogels as effective and safe post-harvest preservatives.

Naturally Derived Carbon Dots In Situ Confined Self-Healing and Breathable Hydrogel Monolith for Anomalous Diffusion-Driven Phytomedicine Release.

Fluorescent nanocarbons are well-proficient nanomaterials because of their optical properties and surface engineering. Herein, Apium graveolens-derived carbon dots (ACDs) have been synthesized by a one-step hydrothermal process without using any surplus vigorous chemicals or ligands. ACDs were captured via an in situ gelation reaction to form a semi-interpenetrating polymer network system showing mechanical robustness, fluorescent behavior, and natural adhesivity. ACDs-reinforced hydrogels were tested against robust uniaxial stress, repeated mechanical stretching, thixotropy, low creep, and fast strain recovery, confirming their elastomeric sustainability. Moreover, the room-temperature self-healing behavior was observed for the ACDs-reinforced hydrogels, with a healing efficacy of more than 45%. Water imbibition through hydrogel surfaces was digitally monitored via "breathing" and "accelerated breathing" behaviors. The phytomedicine release from the hydrogels was tuned by the ACDs' microstructure regulatory activity, resulting in better control of the diffusion rate compared to conventional chemical hydrogels. Finally, the phytomedicine-loaded hydrogels were found to be excellent bactericidal materials eradicating more than 85% of Gram-positive and -negative bacteria. The delayed network rupturing, superstretchability, fluorescent self-healing, controlled release, and antibacterial behavior could make this material an excellent alternative to soft biomaterials and soft robotics.

Targeting tumor cells using magnetic nanoparticles - a feasibility study in animal models.

INTRODUCTION: In non-resectable tumors, chemotherapy is crucial to improve patient survival. However, it is often accompanied by considerable side effects. Targeted delivery of chemotherapy by coupling with iron oxide superparamagnetic nanoparticles (IONP) could potentially increase efficacy while decreasing adverse systemic side effects. We aimed to evaluate the feasibility of targeting nontoxic, biodegradable-IONP into tumors in-vivo by applying an external magnetic field. MATERIAL AND METHODS: Subcutaneous colon carcinoma tumors were induced in 35 mice. IONP was injected systemically, followed by suturing of a magnet on top of the tumors for 2-24 h. Tumors and livers were excised and stained for iron to explore IONP localization. RESULTS: Iron staining was evident in 43% and 20% of tumors exposed to magnets for 4 h or 24 h, respectively. No iron was present following 2 h exposure, nor in the control group; however, iron stain in the livers indicates most of the IONP were cleared by the liver 24 h later. CONCLUSION: We demonstrated the targeting feasibility of IONP to tumor tissue by an external magnetic field. Our data shows successful targeting; however, with low efficacy following systemic injection of the IONP. As such, a paradigm shift is strongly recommended from systemic to locoregional IONP injection to increase targeting efficacy.

Fabrication of Transparent Silica/PEG Smooth Thin Coatings on Polymeric Films for Antifogging Applications.

Fog accumulation on surfaces typically has a negative effect by reducing their transparency and efficiency. Applications such as plastic packaging, agricultural films, and particularly many optical devices suffer from these negative effects. One way to prevent fogging is to coat the substrate with an antifogging coating having a smooth surface and hydrophilic surface chemical groups. This causes the fog water droplets that come into contact with the substrate to completely flatten across its surface, thus retaining transparency. These coatings are mostly relegated to laboratory research due to their insufficient stability and costly synthetic processes. We proposed the use of organically modified silica particles consisting of a mixture of tetraethyl orthosilicate and methacryloxypropyltriethoxysilane, which were grown in situ in the presence of a corona-activated polyethylene film, thus providing a thin siloxane coating containing activated double bonds. An additional coating of poly(ethylene glycol) diacrylate was then spread on the coated film and polymerized via UV curing. The in situ process and UV curing anchored the coating to the substrate through covalent bonds, which provided additional stability. This coating exhibited low surface roughness and contact angle, which resulted in excellent antifogging properties when exposed to a hot-fog test. Furthermore, the antifogging coating retained its properties after 10 hot-fog cycles, indicating the high coating stability. Additionally, the coating was found durable to immersion in aqueous pH levels 1-13 and detergent solutions as well as to tape test applications and sand test. This coating was compared to a commercially available antifogging spray, which was used to coat a polyethylene film. This resulted in excellent initial antifogging properties, which decreased after exposure to durability tests. The results of the in situ coating process indicate its potential uses for industrial applications.

Mussel-Inspired Polynorepinephrine/MXene-Based Magnetic Nanohybrid for Electromagnetic Interference Shielding in X-Band and Strain-Sensing Performance.

The current work delivers preparation of MXene-based magnetic nanohybrid coating for flexible electronic applications. Herein, we report carbon dot-triggered photopolymerized polynorepinepherene (PNE)-coated MXene and iron oxide hybrid deposited on the cellulose microporous membrane via a vacuum-assisted filtration strategy. The surface morphologies have been monitored by scanning electron microscopy analysis, and the coating thickness was evaluated by the gallium-ion-based focused ion beam method. Coated membranes have been tested against uniaxial tensile stretching and assessed by their fracture edges in order to assure flexibility and mechanical strength. Strain sensors and electromagnetic interference (EMI) shielding have both been tested on the material because of its electrical conductivity. The bending strain sensitivity has been stringent because of their fast 'rupture and reform' percolation network formation on the coated surface. Increased mechanical strength, solvent tolerance, cyclic deformation tolerance, and EMI shielding performance were achieved by decreasing interstitial membrane porosity. Considering a possible application, the membrane also has been tested against simulated static and dynamic water flow conditions that could infer its excellent robustness which also has been confirmed by elemental analysis via ICP-MS. Thus, as of nurturing the works of the literature, it could be believed that the developed material will be an ideal alternative of flexible lightweight cellulose for versatile electronic applications.

Design of Magnetic Hydrogels for Hyperthermia and Drug Delivery.

Hydrogels are spatially organized hydrophilic polymeric systems that exhibit unique features in hydrated conditions. Among the hydrogel family, composite hydrogels are a special class that are defined as filler-containing systems with some tailor-made properties. The composite hydrogel family includes magnetic-nanoparticle-integrated hydrogels. Magnetic hydrogels (MHGs) show magneto-responsiveness, which is observed when they are placed in a magnetic field (static or oscillating). Because of their tunable porosity and internal morphology they can be used in several biomedical applications, especially diffusion-related smart devices. External stimuli may influence physical and chemical changes in these hydrogels, particularly in terms of volume and shape morphing. One of the most significant external stimuli for hydrogels is a magnetic field. This review embraces a brief overview of the fabrication of MHGs and two of their usages in the biomedical area: drug delivery and hyperthermia-based anti-cancer activity. As for the saturation magnetization imposed on composite MHGs, they are easily heated in the presence of an alternating magnetic field and the temperature increment is dependent on the magnetic nanoparticle concentration and exposure time. Herein, we also discuss the mode of different therapies based on non-contact hyperthermia heating.

Tumor-Targeted Fluorescent Proteinoid Nanocapsules Encapsulating Synergistic Drugs for Personalized Cancer Therapy.

Personalized cancer treatment based on specific mutations offers targeted therapy and is preferred over "standard" chemotherapy. Proteinoid polymers produced by thermal step-growth polymerization of amino acids may form nanocapsules (NCs) that encapsulate drugs overcoming miscibility problems and allowing passive targeted delivery with reduced side effects. The arginine-glycine-glutamic acid (RGD) sequence is known for its preferential attraction to αvß3 integrin, which is highly expressed on neovascular endothelial cells that support tumor growth. Here, tumor-targeted RGD-based proteinoid NCs entrapping a synergistic combination of Palbociclib (Pal) and Alpelisib (Alp) were synthesized by self-assembly to induce the reduction of tumor cell growth in different types of cancers. The diameters of the hollow and drug encapsulating poly(RGD) NCs were 34 ± 5 and 22 ± 3 nm, respectively; thereby, their drug targeted efficiency is due to both passive and active targeting. The encapsulation yield of Pal and Alp was 70 and 90%, respectively. In vitro experiments with A549, MCF7 and HCT116 human cancer cells demonstrate a synergistic effect of Pal and Alp, controlled release and dose dependence. Preliminary results in a 3D tumor spheroid model with cells derived from patient-derived xenografts of colon cancer illustrate disassembly of spheroids, indicating that the NCs have therapeutic potential.

Fabrication of Magnetic Platforms for Micron-Scale Organization of Interconnected Neurons.

The ability to direct neurons into organized neural networks has great implications for regenerative medicine, tissue engineering, and bio-interfacing. Many studies have aimed at directing neurons using chemical and topographical cues. However, reports of organizational control on a micron-scale over large areas are scarce. Here, an effective method has been described for placing neurons in preset sites and guiding neuronal outgrowth with micron-scale resolution, using magnetic platforms embedded with micro-patterned, magnetic elements. It has been demonstrated that loading neurons with magnetic nanoparticles (MNPs) converts them into sensitive magnetic units that can be influenced by magnetic gradients. Following this approach, a unique magnetic platform has been fabricated on which PC12 cells, a common neuron-like model, were plated and loaded with superparamagnetic nanoparticles. Thin films of ferromagnetic (FM) multilayers with stable perpendicular magnetization were deposited to provide effective attraction forces toward the magnetic patterns. These MNP-loaded PC12 cells, plated and differentiated atop the magnetic platforms, were preferentially attached to the magnetic patterns, and the neurite outgrowth was well aligned with the pattern shape, forming oriented networks. Quantitative characterization methods of the magnetic properties, cellular MNP uptake, cell viability, and statistical analysis of the results are presented. This approach enables the control of neural network formation and improves neuron-to-electrode interface through the manipulation of magnetic forces, which can be an effective tool for in vitro studies of networks and may offer novel therapeutic biointerfacing directions.

Carbon-Dots-Initiated Photopolymerization: An In Situ Synthetic Approach for MXene/Poly(norepinephrine)/Copper Hybrid and its Application for Mitigating Water Pollution.

The current work presents a facile and green synthesis of carbon quantum dots (C-dots), which could serve as initiators for polymerization. Herein, C-dots have been synthesized from an easily available green herb, dill leaves, by a single-step hydrothermal method. These C-dots were efficiently utilized as initiators for the photopolymerization of the polymer poly(norepinephrine) (PNE) for the first time. The photopolymerization is discussed by a factorial design, and the optimized synthesis conditions were evaluated by a third-order regression model of three reaction parameters: monomer concentration, C-dots concentration, and UV exposure time. The sign convention of the factorial design mode indicated that monomer concentration and time of exposure are the most important factors for polymerization. The photopolymerized poly(norepinephrine) was extensively studied using Fourier transform infrared (FTIR) analysis, X-ray photoelectron spectroscopy (XPS), mass spectra, scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle measurement, and thermogravimetric analysis (TGA). UV-assisted deposition of PNE on six different types of substrates was performed, and their water contact angle and surface morphology were studied to evaluate the coating. This UV-triggered polymerization technique was further applied to fabricate sandwich-like composite catalyst MXene/poly(norepinephrine)/copper nanoparticles. This catalyst displayed good performance in the reduction of 4-NP (4-nitrophenol) at ambient temperature, and the first-order rate constant of the catalysis was 9.39 × 10-3 s-1. The reusability of the catalyst was evaluated in terms of the conversion factor. After 10 catalytic cycles, the conversion to catalyze 4-NP was still greater than 91%. The catalytic performance was also evaluated in the continuous flow condition through a membrane, fabricated from a cellulose filter paper coated with MXene/poly(norepinephrine)/copper nanoparticles. This composite catalyst not only offers a practical mode for the catalytic reaction of MXene-based materials but also lays down the foundation for the development of new catalysts.

Immobilization of Heteroatom-Doped Carbon Dots onto Nonpolar Plastics for Antifogging, Antioxidant, and Food Monitoring Applications.

This work presents the facile synthesis of heteroatom-doped fluorescent carbon quantum dots (C-dots), which could serve as an antioxidant. Herein, nitrogen, phosphorous, and sulfur codoped carbon dots (NPSC-dots) have been synthesized by a single-step hydrothermal strategy. Owing to the radical scavenging activity of the NPSC-dots, they were tested against several methods as well as in practical applications. The antioxidant ability of the NPSC-dots was efficiently utilized on plastic films by coating with these NPSC-dots. For the very first time, NPSC-dots were immobilized onto nonpolar plastic films (polypropylene) via photochemical covalent grafting to extend the shelf life of food items or storage without affecting the quality of plastic films. The NPSC-dot-coated PP film with negligible deterioration of transparency was extensively studied using scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) analysis, X-ray photoelectron spectroscopy (XPS), contact angle measurement, and thermogravimetric analysis (TGA). The fluorescent character, antioxidant ability, and durability under different solvent systems of the coated film were examined. Also, the coated films were extensively and rigorously evaluated against simulated drastic environmental conditions to ensure the durability and antifogging application.

Tailor made magnetic nanolights: fabrication to cancer theranostics applications.

Nanoparticles having magnetic and fluorescent properties could be considered as a gift to materials scientists due to their unique magneto-optical qualities. Multiple component particles can overcome challenges related with a single component and unveil bifunctional/multifunctional features that can enlarge their applications in diagnostic imaging agents and therapeutic delivery vehicles. Bifunctional nanoparticles that have both luminescent and magnetic features are termed as magnetic nanolights. Herein, we present recent progress of magneto-fluorescent nanoparticles (quantum dots based magnetic nanoparticles, Janus particles, and heterocrystalline fluorescent magnetic materials), comprehensively describing fabrication strategies, types, and biomedical applications. In this review, our aim is not only to encompass the preparation strategies of these special types of magneto-fluorescent nanomaterials but also their extensive applications in bioimaging techniques, cancer therapy (targeted and hyperthermic), and sustained release of active agents (drugs, proteins, antibodies, hormones, enzymes, growth factors).

Engineering of Doxorubicin-Encapsulating and TRAIL-Conjugated Poly(RGD) Proteinoid Nanocapsules for Drug Delivery Applications.

Proteinoids are non-toxic biodegradable polymers prepared by thermal step-growth polymerization of amino acids. Here, P(RGD) proteinoids and proteinoid nanocapsules (NCs) based on D-arginine, glycine, and L-aspartic acid were synthesized and characterized for targeted tumor therapy. Doxorubicin (Dox), a chemotherapeutic drug used for treatment of a wide range of cancers, known for its adverse side effects, was encapsulated during self-assembly to form Dox/P(RGD) NCs. In addition, tumor necrosis factor-related apoptosis-inducing ligand (TRAIL), which can initiate apoptosis in most tumor cells but undergoes fast enzyme degradation, was stabilized by covalent conjugation to hollow P(RGD) NCs. The effect of polyethylene glycol (PEG) conjugation was also studied. Cytotoxicity tests on CAOV-3 ovarian cancer cells demonstrated that Dox/P(RGD) and TRAIL-P(RGD) NCs were as effective as free Dox and TRAIL with cell viability of 2% and 10%, respectively, while PEGylated NCs were less effective. Drug-bearing P(RGD) NCs offer controlled release with reduced side effects for improved therapy.